Why have an epoxy garage floor? Ordinary garage flooring are just simple gray concrete. In excess of time, stains from grease, oils, and chemical substances cause simple gray concrete to turn out to be an unsightly eyesore. Having an epoxy garage ground coating will give you several years of services, longevity and will resist most stains as nicely as supply you with a superbly, finished floor to preserve the value of your property.
The Most Common Epoxy Floor Coating Programs
There are three frequent programs offered that will boost your garage floor:
1. Epoxy & Polyurethane Solid Color System
two. Epoxy Chipstone (partial vinyl chip broadcast) with Polyurethane Prime Coat Technique
three. Epoxy Granitex (100% vinyl chip broadcast) with Polyurethane Prime Coat System
Maintain in thoughts that with these 3 epoxy programs, you have ‘good’, ‘better’ and ‘best’ kinds of epoxy garage ground systems.
The Excellent System
The epoxy polyurethane strong shade method will previous around five-seven many years, maintenance free of charge, but will demand a maintenance coat of pigmented polyurethane. This garage flooring coating is generally a two-coat, skinny film program ranging in thickness from four-twenty mils. It is used by roller or airless sprayer.
The Greater Program
The epoxy Chipstone method will very last about 7-12 many years, servicing totally free ahead of needing a routine maintenance coat of clear polyurethane. This epoxy garage flooring technique typically consists of one particular pigmented primer coat of epoxy a pigmented coloration coat with a partial/mild broadcast of vinyl chips into the damp epoxy and a single coat of very clear polyurethane for safety. The thickness is around twenty-30 mils.
The Greatest System
The epoxy Granitex system can last as extended as 12-fifteen+ a long time, maintenance free before needing a upkeep coat of polyurethane. This epoxy ground coating is normally one pigmented primer coat a pigmented colour coat with a a hundred%/complete broadcast of vinyl chips and two coats of very clear polyurethane.
Preparation
Appropriate surface planning is crucial to the extended expression success of the installation. All surfaces to be coated need to be cleaned of contaminants which may interfere with bonding. Concrete should be acid-etched, shot-blasted or diamond-floor to accomplish a profile related to one hundred twenty grit sandpaper. Soon after preparing, the concrete floor must be inspected for holes and cracks. If holes or cracks are common, then patchwork should be performed. Once planning is complete, installation is all set to commence.
Installation of Granitex Epoxy Garage Flooring Program:
one. Surface preparation, patchwork and roll one coat of pigmented epoxy primer.
two. Right after epoxy primer is dry, inspect, prep and roll a single coat of pigmented epoxy over primed location. Work in 10×10 or 12×12 sections at a time. Whilst epoxy is soaked, broadcast vinyl chips into soaked epoxy. Be confident the location gets one hundred% protection. When all sections are completely coated, permit dry extensively.
3. After all sections are dry, scrape, sweep and vacuum all excess Granitex vinyl chips from the surface. Apply garage floor epoxy of polyurethane to lock and lay vinyl chips down.
four. When the polyurethane is dry, implement a 2nd coat for a final leading coat. As an alternative, non-skid resin sand can be included to improve the slip resistance.
All epoxy garage flooring coatings can be simply cleaned with mild, liquid detergents then mopping, hosing or even “swiffering”. Grease, oils, and most chemical compounds will not stain or take up into the epoxy coated floor.